Denon DVM-1835 Operating Instructions Manual

Also see for DVM-1835 - DVD Changer: Specifications Operating instructions Operating instructions

English– 15 – ENDuring playback, press theSTILL/PAUSE button.• Playback will pause and soundwill be muted.The disc advances by one frame each time theSTILL/PAUSE button is pressed.To exit step by step playback, press the PLAY but-ton.321DVDStep by Step PlaybackDuring playback, press theSTILL/PAUSE button.• Playback will pause and soundwill be muted.To continue playback, press the PLAY button.21WMAJPEGMP3CDDVDPauseGetting started• Turn on the power of the TV, amplifier and any other com-ponents which are connected to the DVD player.• Make sure the TV and audio receiver (commercially avail-able) are set to the correct channel.Press the POWER ON button.• “P-ON” will appear briefly on the display panel.Press the OPEN/CLOSE button to open disc load-ing tray.Press the DISC SKIP button repeatedly or pressthe DISC NUMBER button.• The desired disc tray moves to the front position.Place the disc in the tray,with the label facing up.• Repeat steps 3 and 4 toload more discs.Press the PLAY button.• The tray will close automatically, and playback will startfrom the first chapter or track of the disc. If the playbackdoes not start automatically, press the PLAY button.• If the disc has not been set on the tray, the DVD playerwill play the disc which is set on the right side tray.• When you want to select the other disc, press the DISCSKIP button repeatedly or the DISC NUMBER buttonfor your desired disc.• When you playback the DVD with a title menu, it mayappear on the screen. In this case, refer to “TitleMenu”.Press the STOP button to stop playback.NOTES:• A “prohibited icon” may appearat the top-right on the TV screenduring operation, warning that aprohibited operation has beenencountered by the DVD playeror the disc.• With DVDs that use some titlesfor playback program signals,playback may start from the second title, or it may skipthese titles.• During the playback of two layered disc, pictures maystop for a moment. This happens when the 1st layerswitches to the 2nd layer. This is not a malfunction.• During the playback of a DVD-RW which has beenrecorded in the VR mode, the sound or picture mayfreeze momentarily depended on disc content.• You can open the tray and change 2 discs during play-back by pressing the DISC EXCHANGE button.• Disc position will be displayed on the TV screen forabout 5 minutes when you turn on the power or closethe tray.654321WMAJPEGMP3CDDVDLeft side trayRight side trayPress the MENU button.• The DVD main menu will appear.If the feature is not available, symbol mayappear on the TV screen.If disc menu is available on the disc, audio lan-guage, subtitle options, chapters for the title andother options will appear for selection.Press the Cursor buttons ( L / K / B / s ) to selectan item, and the ENTER button to confirm selec-tion.4321DVDPLAYING A DISCBasic PlaybackDisc MenusDVD may contain menus to navigate the disc and accessspecial features. Press the appropriate Numeric buttons oruse the Cursor buttons ( L / K / B / s ) to highlight yourselection in the DVD main menu and press the ENTER but-ton to confirm.NOTE:• Unless stated, all operations described are based onremote control use. Some operations can be carriedout using the menu bar on the TV screen.DVDGeneral FeaturesPress the TOP MENU button.• The title menu will appear.If the feature is not available, symbol mayappear on the TV screen.Press the Cursor buttons ( L / K / B / s ) to selectan item, and the ENTER button to confirm theselection.• Playback will begin at the selected Title.321DVDTitle Menu• Press the MENU button to call up the DVD main menu.• Press the TOP MENU button to call up the title menu.NOTE:• Contents of menus and corresponding menu opera-tions may vary between discs. Refer to the manualaccompanying the disc for details.CALLING UP A MENU SCREEN DURING PLAYBACKFFThe brightness of the front display can be adjusted from theSETUP menu. Details are on page 24.Brightness of the Front Display