Denon DVM-2845 Specification

Also see for DVM-2845: Operating instructions Specifications

Denon DVM-2845 Specification Manual pdf 5 page image

Ver 2.01Date : Nov.29.2005 5 page of 46Copyright 2005 DENON Co.,Ltd.command has been normally executed.4) The host shall give an answer to a command that gives operational instructions, thenissue a status request command, and decide whether this unit has finished operating withregard to the command that gives operational instructions.5) The time from the start of command transmission to the end of command transmissionshould be max 40 msec.6) The time from the completion of command transmission to the start of answer-back isMAX. 5 sec.7) This unit cannot receive any commands for about 5 seconds after the power switch isturnied on.1.4.2 Communication errors1) Having received a command, which results in a communication error ( overrun, framing,or parity error ) , this unit shall give NAK ( 15h ) . ( MAX 80ms from the start ofcommand transmission )2) If the host has received NAK from this unit, it shall retransmit the command that it hastransmitted immediately beforehand.3) Having received an answer, which results in a communication error ( overrun, framing,or parity error ) , the host shall respond with NAK.4) If it has received NAK from the host, this unit shall retransmit the answer it hastransmitted immediately beforehand. ( MAX 40ms)5) When there is no answer from the unit within 6s, the host shall retransmit thecommand.