Denon PMA-600NE Owner's Manual

Also see for PMA-600NE: Owner's manual Quick start guide Owner's manual Quick start guide

o Reconnecting to this unit from a BluetoothdeviceAfter pairing is completed, the Bluetooth device can be connectedwithout performing any operations on this unit.This operation also needs to be performed when switching theBluetooth device for playback.1 If a Bluetooth device is currently connected, deactivatethe Bluetooth setting of that device to disconnect it.2 Activate the Bluetooth setting of the Bluetooth deviceto be connected.3 Select this unit from the Bluetooth device list on yourBluetooth device.4 Play music using any app on your Bluetooth device.0 When the power of this unit is turned on and analog mode is off, the input sourcewill be automatically switched to “BLUETOOTH” if a Bluetooth device isconnected.0 When a Bluetooth device is connected with the unit while on Bluetooth standbystate (while the power indicator is lit in red), the power of the unit will be turned onautomatically. To enable Bluetooth standby, set this unit to standby when analogmode is off. (v p. 27)Connecting and playing back from adigital device (Coaxial/Optical)1 Connect digital device to this unit. (v p. 21)2 Press the input source select button (COAXIAL,OPTICAL 1 or OPTICAL 2) to switch the input source to“COAXIAL”, “OPTICAL 1” or “OPTICAL 2”.The indicator of the selected input source lights.3 Start playback of the digital device connected to thisunit.The DIGITAL IN/BLUETOOTH indicator lights in green.0 The DIGITAL IN/BLUETOOTH indicator blinks in green when audio signals thatare not supported by this unit are input.0 If the sampling frequency cannot be detected, the DIGITAL IN/BLUETOOTHindicator turns off.Contents Connections Playback Settings Tips Appendix30Front panel Rear panel Remote controlunit Index