Denon S-302 Owner's Manual

Also see for S-302: Manual Product sheet Code List Dimensions Quick setup guide

0Getting Started SetupENGLISHConnections Playback Remote Control Information Troubleshootingf Network SetupMake settings for wired or wireless LAN.Wired LANMake settings for wired LAN.If a Ethernet cable is connectedTo acquire the IP address automaticallyusing the DHCP functionTo enter the IP address manuallyTurn on the S-302’s power.At the GUI menu “Setup” – “Network Setup” –“Network Setup” – “Detail” setting, set “DHCP” to“OFF” and enter the IP address, subnet mask, defaultgateway, primary DNS and secondary DNS.To not pass through the proxy server To connect via proxy serverAt the GUI menu “Setup” – “Network Setup” –“Network Setup” – “Proxy” setting, set “Proxy” to“ON” and enter the address or domain name andport numbers.This setting is required when the networkis established via proxy servers.Recheck the connections and settings if you cannot connect to the Internet (vpage 14).The mode automatically switches to “Wired”.This completes the setting.NOTE Knowledge about networks is required to make the IP address and proxy settings. For details, consult a network administrator.1.S-302E2_1st.indd 24 2007/07/30 20:01:07