Denon SC-CX303 - Compact Audiophile Loudspeaker Operating Instructions Manual

Contents

3Connections ConnectionsENGLISH¢ Connecting to an amplifier with two sets ofspeaker outputs (A+B)• Set the speaker output selector switch to “A+B”.Bi-wiring connectionsThe speaker system (SC-CX303) input terminals and circuitry allowsbi-wiring connections with the treble (upper tier) and bass (lower tier)isolated and independent. This enables playback of high quality soundwithout the audio signal interference resulting from the difference inlevel between the treble and bass.Use two connection cords per SC-CX303 unit.Remove the short-circuit cords from the “+” and “–” sides.¢ Connecting to an amplifier with only one set ofspeaker outputs• Also use this procedure to connect to amplifiers on which it is notpossible to output A and B simultaneously even if the amplifierhas two sets of outputs, or amplifiers on which the two sets ofoutputs are connected in series.To speaker “+” terminalTwist the tip firmlyTo speaker “–” terminal• The SC-CX303’s impedance does not change even when using withbi-wiring connections.• For even more advanced enjoyment, if you have two amplifiers youcan set up a bi-amp drive system. In this case, set the outputs of thetwo amplifiers to the same level.CAUTION:• If the amplifiers have different output levels, only the treble orthe bass will be emphasized and it will be impossible to achievethe optimum balance between the two.ENGLISHTweeter terminalsWoofer terminalsConnect to amplifier’s A speaker “+” side.Connect to amplifier’sA speaker “–” side.Connect to amplifier’sB speaker “+” side.Connect to amplifier’sB speaker “–” side.

/ 8

Related manuals for Denon SC-CX303 - Compact Audiophile Loudspeaker