90BHT-1170BWB-CE / BHT-1171BWB-CE4.5 Wireless Network Settings4.5.1 Wireless LAN MenuDouble-tap “Wireless LAN” at the System Properties screen to displaythe screen on the right.This menu can be used to perform the following processes.• Displaying the wireless module version and current connectionstatus, and opening/closing the wireless device• Displaying the IP address and MAC address• Setting the wireless LAN options• Editing the profiles• Displaying the current communication status• Performing a Ping test4.5.2 Displaying the Wireless Module Versionand current connection status, and Opening/Closing the WirelessDeviceTap the “Information” tabbed page at the Wireless LAN menu to displaythe screen on the right. This menu displays the following information.Wireless Module VersionDriver Version: Wireless driver versionFirmware Version: Wireless module firmware versionStatusActive Profile: Active ProfileStatus: Current connection statusBSSID: Current BSSIDSignal Strength: Current signal strengthChannel: Current communication channelIP Address BHT IP AddressSelect Profile Select profile to connect the access point− Note − It may be different between Active Profile and Select Profile. To change Active Profile,select profile and tap the [Apply] button.Also, the displayed active profile is not refleshed immediately, even if the profile is changedby other application and refresh the profile after re-open wireless device with [Close] -[Open] button.Furthermore, wireless devices can also be opened and closed by tapping the [Open] and [Close] buttons.− Note − If the wireless device is opened by tapping [Open], the device remains continuously openeven if the Wireless LAN menu is closed. To close the wireless device, open this menuagain and tap the [Close] button.
