Denso BHT-6000 User Manual

Contents

Denso BHT-6000 User Manual Manual pdf 151 page image

1365.3 Applying Power to the CU-6000Apply power to the CU-6000 by connecting it to the wall socket via the attached ACadapter according to the steps given below.(1) Make sure that the CU-6000 is turned off.(2) Connect the outlet plug of the AC adapter to the power inlet connector of the CU-6000, then plug the other end of the AC adapter into the wall socket.• If you are not using the CU for a long time, be sure tounplug the AC adapter from the wall socket for safety.Failure to do so could result in a fire.• When caring for the CU, unplug the AC adapter from thewall socket for safety.Failure to do so could result in an electrical shock.• Never cover or wrap up the CU or AC adapter in a cloth orblanket.Doing so could cause the unit to heat up inside, deformingits housing, resulting in a fire.Always use the CU and AC adapter in a well-ventilatedarea.• Keep the power cord away from any heating equipment.Failure to do so could melt the sheathing, resulting in a fireor electrical shock.• If smoke, abnormal odors or noises come from the CU,immediately turn off the power, unplug the AC adapterfrom the wall socket, and contact your nearest dealer.Failure to do so could cause fire or electrical shock.• If foreign material or water gets into the CU, immediatelyturn off the power, unplug the AC adapter from the wallsocket, and contact your nearest dealer.Failure to do so could cause fire or electrical shock.• If you drop the CU so as to damage its housing, immedi-ately turn off the power, unplug the AC adapter from thewall socket, and contact your nearest dealer.Failure to do so could cause fire or electrical shock.• Use the furnished AC adapter only. Failure to do so couldresult in a fire.• Never use the CU on the line voltage other than the speci-fied level. Doing so could cause the CU to break or burn.• If the power cord of the AC adapter is damaged (e.g.,exposed or broken lead wires), stop using it and contactyour nearest dealer.Failure to do so could result in a fire or electrical shock.WARNINGCAUTION(3) Power on the CU-6000.AC adapterPower inlet connectorPower switch