Chapter 2 Getting Started the BHT and System Mode33! Scandisk when the resume function is enabledIf Scandisk runs when the resume function is enabled, the screen given below may appear. The screenmay also appear when the calendar clock built in the BHT stops, even without running Scandisk.The BHT displays the screen for three seconds and then automatically runs the execution program fromthe beginning.[ 3 ] About "$$BRKLST.SYS"If Scandisk finds an invalid file(s), it will automatically create the "$$BRKLST.SYS" file. To check thecontents of the file, upload the file in System Mode to the host PC. (Refer to Section 2.5.3, "[ 3 ]Uploading.")Contents of the "$$BRKLST.SYS" fileRecords (1) File name(2) Error factor + (Broken since the BHT has not been turned off normally)* (Broken due to any other causes)(3) Broken records e.g. 01000-01200 (Data in records numbered 1000 to 1200 is lost)(Example)SAMPLE1.DAT + 01000-01050SAMPLE1.DAT + 01200-01250SAMPLE1.DAT + 01600-01650SAMPLE2.DAT * 00250-00275SAMPLE3.DAT * 00100-00150↑ ↑ ↑(1) (2) (3)If more than one sequence of records is broken in a same file, theywill be written into the subsequent records in the"$$BRKLST.SYS."
