Dentalux 93451 Operating Instructions Manual

Also see for 93451: Operating instructions

Contents

Dentalux 93451 Operating Instructions Manual Manual pdf 8 page image

5DZB 3 A1GBIE13) Remove the brush head 1 from the handle 5.Clean the drive shaft 3 on the handle 5 underrunning water. Hold the handle 5 so that thewater only fl ows over the drive shaft 3.Changing the batteriesWhen the toothbrush’s movements become notice-ably weaker, the batteries must be replaced.■ Open the battery compartment by pulling off thebattery compartment cover 6 in a downwardsdirection and remove the old batteries.ATTENTION! DAMAGE TO PROPERTY!Always use batteries of the same type, and neveruse a new battery and an old battery together.■ Insert two new batteries of type AA/LR6 1.5 V.Ensure that the batteries are inserted with thecorrect polarity. This is marked on both contactsinside the battery compartment.■ Replace the battery compartment cover 6 insuch a way that it is securely attached.Cleaning and careATTENTION! DAMAGE TO PROPERTY!► Do not use sharp objects to remove dried-ontoothpaste from the handle 5, otherwisethe seal and thus the appliance may bedamaged.► Do not immerse the handle 5 in water!Liquid must not be allowed to penetrate thehandle 5.■ Remove the brush head 1 from the handle 5.After use, always clean the brush heads 1thoroughly under running water.We recommend cleaning the brush heads 1 ina standard commercial denture cleaning fl uidevery 2–4 weeks. A new brush head 1 shouldbe fi tted after about 3 months, and the brushhead must always be replaced when the bristlesstart to bend outwards.■ To clean the drive shaft 3 and the handle 5,allow a little water to fl ow over them. To do this,hold the handle 5 so that the drive shaft 3 ispointing downwards.Make sure that no water gets into the batterycompartment.StorageRemove the batteries if you do not intend to usethe toothbrush for a long period.Place the protective cap 2 on the brush head 1.