Sleep operationWhen listening to radio, press Sleep button (3) to enter sleep mode.You can just adjust the sleep timer from 90 mins to 15 mins bypressing the Sleep button (3). The unit will automatically turn off afterthe selected time.Dimmer controlIn standby mode, press the DIMMER (3) button allows you to set thebrightness of the LED display to high, medium ,low 3 levels.1. The clock display with dimmer low is the default setting.2. It will consume more power if you set the clock display with dimmerhigherNAP timer function (count down timer)During radio off mode, press the NAP button (10), to turn on the NAPmode, the NAP time will keep by 5 seconds, within 5 seconds andpress NAP button (10) button can change the duration from 90 min –10 min.The alarm buzzer will sound for 30 min and then shut off automatically.To stop the alarm buzzer, press the ON/OFF button (4).Press the NAP button (10) has no effect during alarm operation. PressON/OFF button (4) to cancel NAP function.Select DST (daylight saving time) modeFor countries with daylight saving time (DST) the clock radio offers youDST option to adjust summer time.In standby mode press and hold the DST button (3) for 3 seconds. Theclock advances by one hour.To exit DST mode, repeat the above operation.Projection unit- Focus setting : Adjust the projection clock brightness/focus byturning the brightness/focus adjustment wheel unit the projectedtime is clearly shown on the ceiling or wall.- Adjust projected direction.- To flip projected image by 180°, press PROJECTION TIME 180°FLIP button (2).ENG-5