position.Q:I already insert the memory card into the Digital Photo Frame, why can’t see any image?A: Firstly, make sure that the memory card is same as mentioned above. Secondly, turn off the DigitalPhoto Frame and make sure that the memory card is inserted correctly . Thirdly, restart the frame, theDigital Photo Frame will read your memory card automatically, finally, make sure that you select thecorrect Mode from the next menu: photo for still images.NOTE: Some digital cameras save images in non-standard format. Please refer to your camera’sinstruction manual for details.Q: Does the Digital Photo Frame support all JPEG format?A: No, the Digital Photo Frame only support the standard JPEG format.Control buttons1. Left / Last2.Right / Next3. Play/pause/confirm4. Menu5. Switch, clock/calendar6. Exit7. Power switch, long press to switch on / offControl FunctionsPhotoInsert the power firstly, long press “Power switch” to switch on.Before to play, confirm the file source come from U disk or SD/MMC/MS card. Press Left/Right keyto select.