Depaepe Telecom SecurAccess PMR User Manual
                                                   | |
Contents
| 
Notice SecurAccess PMR 40Example N°1:A list of 5 numbers stored. Repeated dial selection is 9. In case of busy tone and (or) no answer, theSecurAccess will dial 10 times the list of 5 numbers (1 first trial plus 9 repeated trials).Example N°2:A list of 3 numbers stored. Repeated dial selection is 0. In case of busy tone and (or) no answer, theSecurAccess will dial one time the list of 3 numbers and will hang up.3.9. Ringer3 levels adjustment: off-low-high and 3 melodies selection. Adjust as shown:Setting to modify Code Setting choiceFactory settings are shown in greyConfRinger level 0 3 Low : 0 - High : 1 *9Ringer melody 0 4 0 : ringer off1 : Melody N°12 : Melody N°23 : Melody N°3*93.10. Automatic answeringAn auto answer mode can be activated for calling a party standing close to the SecurAccess or toenter the remote programming mode. The SecurAccess will automatically go off-hook after a preprogrammed number of rings:- From 1 up to 9 rings when automatic off-hook selection is activated After 30 rings otherwise.Setting to modify Code Setting choiceFactory settings are shown in greyConf.Auto answer 0 5 Enter the number of rings before auto answer (0 up to 9)Note: 0 = feature deactivated3 = factory setting*93.11. Door latch activation and power schematicThe SecurAccess is fitted with two NO/NC driving contacts for a remote activation of a door latchelectrical relay.Following settings can be chosen by local or remote programming:1. Activation or deactivation of door latches2. Activation duration3. 4 digits access code selection (up to 6 different access codes, Note: 0000 will not work)4. Fast opening selection for the door latch n°1Setting to modify Code Setting choiceFactory settings are shown in greyConf.Door latch N°1activation 6 0 0 : remote and local activated (factory setting)1 : remote and local deactivated (Door latch not active)2: remote activated and local deactivated3: remote deactivated and local activated*9Activation duration door latch N°1 6 1 Enter the number of seconds (from 1 up to 9 seconds).factory setting = 2 seconds*91st access code door latch N°1 6 2 Enter a 4 digits code, (0000 not allowed) *92nd access code door latch N°1 6 3 Enter a 4 digits code, (0000 not allowed) *93rd access code door latch N°1 6 4 Enter a 4 digits code, (0000 not allowed) *94th access code door latch N°1 6 5 Enter a 4 digits code, (0000 not allowed) *9 |
Related manuals for Depaepe Telecom SecurAccess PMR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine