6CHARGING YOURDERMAPOREWe recommend you charge device beforeeach use. Remove DERMAPORE, stand andUSB charging cord from box.Ensure device is powered off. Firmly insertUSB pin into charging socket on right-handside of device.Connect USB power cable to PC or ACadaptor powerbank. Will not charge if PCis in hibernation mode.*Note, power adaptor is not included. Only use a 5VUSB wall adapter (such as a mobile phone charger) tocharge device. If you do not own one, power adaptorsare available for purchase at dermaflash.com/shopA full charge will provide approximately30-40 minutes of usage. Disconnect USBcord once charging is complete.ORLight Battery Level + FunctionSolid White Light Fully Charged, Power ON,EXTRACT MODESolid Blue Light Power ON,INFUSE MODERapid, Flashing White Light Low BatteryPulsing White Light ChargingNo Light Power OFF