Desa 20 Owner's Manual

Also see for 0: Owner's manual Owner's manual OWNER'S OPERATION AND INSTALLATION MANUAL Owner's manual Owner's manual

Desa 20 Owner's Manual Manual pdf 7 page image

7099623VENTILATIONOPERATIONContinuedFigure 6 - Flame-Out Control ResetButton, 8,8/20,5 kW (30/70,000 Btu/Hr)ModelsFigure 7 - Flame-Out Control ResetButton, 26,4 kW (90,000 Btu/Hr)ModelWARNING ICON G 001WARNINGFollow the minimum fresh, outside air ventilationrequirements. If proper fresh, outside air ventilation is notprovided, carbon monoxide poisoning can occur. Provideproper fresh, outside air ventilation before running heater.Provide a fresh air opening of at least 2800 square cm (three square feet) for each29,3 kW (100,000 Btu/Hr) rating. Provide extra fresh air if more heaters are beingused.Example: A 44 kW (150,000 Btu/Hr) heater requires one of the following:• a 4,88 m (16 foot) wide two-car garage door raised 8,59 cm (3.38 inches)• a 2,75 m (9 foot) wide single-car garage door raised 15,24 cm (6 inches)• two, 76,20 cm (thirty-inch) wide windows raised 28 cm (11 inches)Flame-OutControlResetButtonWARNING ICON G 001WARNINGReview and understand the warnings in the SafetyInformation Section. They are needed to safely operate thisheater. Follow all local codes when using this heater.To Start Heater1. Follow all ventilation and safety information.2. Fill fuel tank with kerosene or No. 1 fuel oil.3. Attach fuel cap.4. Plug power cord of heater into standard 230 volt/50 hertz, grounded (earthed)outlet. Use an extension cord if needed. Use only a grounded (earthed) exten-sion cord.Extension Cord Wire Size RequirementsUp to 100 feet (30.5 meters) long, use 16 AWG (1.0 mm2 ) conductor101 to 200 feet (30.6 to 61 meters) long, use 14 AWG (1.5 mm 2 ) conductorHeater will start when power cord is plugged into outlet. If not, push in flame-out control reset button (see Figures 6 thru 8).Flame-OutControlResetButton