Desa CDCFTNA Owner's Operation

Also see for CDCFNR: OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL

www.desatech.com 111244-01G26REMOTEOFFONHILOINOUTopERaTiNG FiREplaCEContinuedNote: The burner may light if hand-heldremote was on when selector switch was lastturned off. You can now turn the burner on andoff with the hand-held remote control unit.IMPORTANT: Do not leave the selector switchin the REMOTE or ON position when the pilotis not lit. This will drain the battery.ON/OFF SERIES (MODEL HRC100SERIES)Hold the control button on the hand-held remoteuntil burner turns on. Hold the control buttonagain until burner turns off (see Figure 49).TO LOCK press both buttons on hand-heldremote control until light stops flashing. Hand-held remote control is now locked. If the fire ison it will be turned off automatically. In thelocked state, the light will not light up whenany button is pressed.TO UNLOCK press both buttons togetheron hand-held remote control until the lightstops flashing. The hand-held remote is nowunlocked.Figure 48 - Setting the Selector Switch,Control Knob and Flame AdjustmentKnob for Remote OperationFlameAdjustment KnobControlKnobSelector Switch in RemotePosition (Optional Remote Control)Figure 49 - On/Off Hand-Held RemoteControl UnitControl ButtonTurns BurnersOn and OffTHERMOSTAT SERIES (MODELHRC200 SERIES)The hand-held remote can be operated usingeither the manual mode (MANU) or thermo-static mode (AUTO) (see Figure 50). To selectFahrenheit/Centigrade mode display, carefullypress the ˚C/˚F mode button with the end of apaper clip or similar blunt object.Manual Mode1. Press the POWER and LOCK buttons togetherto turn on the hand-held remote control.2. Press the MANU button to turn on thefireplace.3. Press the POWER and LOCK buttonstogether to turn off the fireplace.Auto (Thermostatic) Mode1. Press the POWER and LOCK buttons togetherto turn on the hand-held remote control.2. Press AUTO button to select this mode.3. Set the desired room temperature by press-ing the TEMP + or - buttons.4. Press the POWER and LOCK buttonstogether to turn off the fireplaceNote: Do not leave the hand-held remote in theAUTO mode close to the fireplace. The radiantheat from the fireplace will turn off the fireplace.Ideally, place the hand-held remote in the centerof the room facing towards the fireplace.IndicatorLightFigure 50 - Thermostat Hand-HeldRemote Control UnitLOCKMANU AUTOºC/ºFTEMP POWERROOMTEMPSETTEMPAUTOTurnsHand-HeldRemote Onor Off andAllows Youto Choosethe ManualSettingSelectsAUTOMode°C/°FModeButtonLocksSystem toPreventAccidentalIgnitionTurnsBurnersOn orOffIncreases orDecreasesRoomTemperaturein AUTO ModeDigital Display ShowsTemperature and Settings