Desa Comfort Glow CGN18R Owner's Operation And Installation Manual

Contents

Desa Comfort Glow CGN18R Owner's Operation And Installation Manual Manual pdf 18 page image

180994344. Wait five (5) minutes to clear out any gas. Then smell for gas, includingnear the floor. If you smell gas, STOP! Follow “B” in the safety informationat the top of page 17. If you don’t smell gas, go to the next step.5. Press in control knob.Note: You may be running this heater for the first time after hooking upto gas supply. If so, you may need to press in control knob for 30 seconds.This will allow air to bleed from the gas system.• If control knob does not pop up when released, contact a qualifiedservice person or gas supplier for repairs.6. Keep control knob pressed in and turn it counterclockwise C-clockwise to thePILOT/IGN position. This will light pilot.Note: You will hear a loud “click” when the control knob reaches thePILOT/IGN position.If pilot does not light• turn control knob clockwise Clockwise to the OFF position• repeat steps 5 and 6If pilot does not stay lit after several tries• refer to Troubleshooting, pages 22 through 25• contact a qualified service person or gas supplier for repairsUntil repairs are made, light pilot with match. To light pilot with match, seeManual Lighting Procedure, page 20.7. Keep control knob pressed in for 10 seconds after lighting pilot. After 10seconds, release control knob.Note: If pilot goes out, repeat steps 3 through 7.Ignitor ElectrodeFigure 16 - PilotPilot BurnerThermocoupleOPERATINGHEATERContinued