Desa H.S.I. Series Owner's Manual

Also see for H.S.I. Series: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

3107325For more information, visit www.desatech.comFigure 2 - Wheel and Handle AssemblyFigure 1 - 200,000 Btu/HrPRODUCT IDENTIFICATIONLower ShellHot AirOutletFan GuardFuel TankSide CoverFuel CapUpper ShellPower CordIgnition Control Assembly(on inside of side cover)HandleWheelSupportFrameWheel ExtendedHubHot AirOutletFuelTankFlangeScrewNutCap NutAxleAirInletThese models are furnished with wheels anda rear handle. Some models are furnishedwith a front handle also. Wheels, handle(s),and the mounting hardware are found in theshipping carton.TOOLS NEEDED• Medium Phillips Screwdriver• 3/8" Open or Adjustable Wrench• Hammer1. Slide axle through wheel supportframe. Install wheels on axle.IMPORTANT: When installing wheels,point extended hub of wheels towardwheel support frame (see Figure 2).2. Place cap nuts on axle ends. Gently tapwith hammer to secure.3. Place heater on wheel support frame.Make sure hot air outlet end (front) ofheater is over wheels. Line up holes onfuel tank flange with holes on wheel sup-port frame.4. Place rear handle (and front handle ifprovided) on top of fuel tank flange.Insert screws through handle(s), fueltank flange, and wheel support frame.Attach nut finger tight after each screwis inserted.5. After all screws are inserted, tightennuts firmly.ASSEMBLYThermostat Knob• PRODUCT IDENTIFICATION• ASSEMBLY