Desa HDVSR78 Owner's Operation And Installation Manual

Contents

Desa HDVSR78 Owner's Operation And Installation Manual Manual pdf 4 page image

www.desatech.com 117272-01F4LOCAL CODESInstall and use log set with care. Follow all localcodes. In the absence of local codes, use the lat-est edition of The National Fuel Gas Code ANSIZ223.1/NFPA 54*.*Available from:American National Standards Institute, Inc.1430 BroadwayNew York, NY 10018National Fire Protection Association, Inc.Batterymarch ParkQuincy, MA 02269Figure 1 - Product Identification(Dual Burner Shown)Hearth Kit Model ___________________Serial Number _____________________Log Set Model _____________________GrateBurnerPanBurner Manifold Burner InletFittingBurner ClampGrate StepsOPTIONAL PRODUCT FEATURESPRODUCT IDENTIFICATIONUNPACkINGCAUTION: Do not remove thedata plates from the burner pan.The data plates contain impor-tant product information.1. Remove logs, hearth kit, pan materials,and hardware from carton.2. Remove all protective packaging appliedto logs and base for shipment.3. Check heater for any shipping damage.If heater is damaged call DESA Heating,LLC at 1-866-672-6040 for replacementparts before returning to dealer.ON/OFF SAFETY VALVE/PILOT kITAND PROPANE/LP CONVERSIONAn optional valve/safety pilot kit with a piezoignitor is available for this appliance. This sys-tem requires no matches, batteries, or othersources to light. You must use this optionalsystem for LP conversion. See Accessories,page 19.REMOTE CONTROL READY(MILLIvOLT) SAFETy vALvE/PILOT kITAn optional millivolt valve/safety pilot kit witha piezo ignitor is available for this appliance.This system requires no matches, batteries,or other sources to light. This system maybe connected to a wall switch or hand-heldwireless remote control. See Accessories,page 19.REMOTE CONTROL ACCESSORIESThere is an optional hand-held ON/OFF re-mote control that can be purchased separatelyfor this log set. You must use the millivoltvalve/safety pilot kit to use remote acces-sories with this appliance. See Accessories,page 19.A wall switch is also available for this appli-ance. You must use the millivolt valve/safetypilot kit to use the wall switch with this appli-ance. See Accessories, page 19.