Desa PROPANE GAS LOG HEATER Owner's Operation And Installation Manual

Also see for 24" Variably-Controlled Models: Owner's manual OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL

Contents

Desa PROPANE GAS LOG HEATER Owner's Operation And Installation Manual Manual pdf 25 page image

25102318CLEANINGANDMAINTENANCEWARNING ICON G 001WARNINGTurn off heater and let cool before cleaning.WARNING ICON G 001CAUTIONYou must keep control areas, burners, and circulating air passage-ways of heater clean. Inspect these areas of heater before eachuse. Have heater inspected yearly by a qualified service person.Heater may need more frequent cleaning due to excessive lint fromcarpeting, bedding material, etc.TROUBLE-SHOOTINGNote: All trouble-shooting items arelisted in order ofoperation.WARNING ICON G 001WARNINGTurn off and unplug heater and let cool before servicing. Only aqualified service person should service and repair heater.WARNING ICON G 001CAUTIONNever use a wire, needle, or similar object to clean ODS/pilot. Thiscan damage ODS/pilot unit.POSSIBLECAUSE1. Ignitor electrode not con-nected to ignitor cable2. Ignitor cable pinched orwet3. Piezo ignitor nut is loose4. Broken ignitor cable5. Bad piezo ignitor6. Ignitor electrode broken7. Ignitor electrode posi-tioned wrongREMEDY1. Reconnect ignitor cable2. Free ignitor cable ifpinched by any metal ortubing. Keep ignitorcable dry3. Tighten nut holdingpiezo ignitor to basepanel of log set. Nut islocated behind basepanel.4. Replace ignitor cable5. Replace piezo ignitor6. Replace piezo ignitor7. Replace piezo ignitorOBSERVEDPROBLEMWhen ignitor buttonis pressed, there is nospark at ODS/pilotODS/PILOT AND BURNERS• Use a vacuum cleaner or small, soft bristled brush to clean.LOGS• If you remove logs for cleaning, refer to Installing Logs, page 19, to properlyreplace logs.• Replace log(s) if broken or chipped (dime-sized or larger).Continued