Desa RC40 Owner's Manual

Also see for RC115T: Owner's manual

Contents

10553633For more information, visit www.desatech.comFor more information, visit www.desatech.comPRODUCT IDENTIFICATIONFigure 1 - 40 ModelFigure 2 - 55T/70T ModelsHandleFuelCapLowerShellPower CordFuel TankHot AirOutletAir FilterEnd CoverFan GuardUpper ShellSide CoverIgnition ControlAssembly(assembly on insideof side cover)ThermostatKnobNose Cone GuardSide CoverFuelTankLowerShellHot AirOutlet Nose Cone GuardHandleUpper ShellPower CordFuelCapAir FilterEndCoverFan GuardIgnition ControlAssembly(assembly on insideof side cover)Figure 3 - 115T/165T ModelsLowerShellHot AirOutlet Fan GuardFuelTankSide CoverFuel CapUpper ShellPower CordIgnition ControlAssembly (assembly oninside of side cover)ThermostatKnobUNPACKING1. Remove all protective packaging that has been applied to heaterfor shipment2. Remove heater from carton.3. Check heater for any shipping damage. If damage is found,promptly inform dealer where heater was purchased.ASSEMBLY(FOR 40, 55T, AND 70T MODELS ONLY)These models are furnished with a nose cone guard. Nose coneguard and mounting screws are found in the shipping carton.Tools Needed• 5/16" Nut Driver or Wrench1. Place nose cone guard on top of upper shell flange. Make surenose cone guard is on hot air outlet end of heater.2. Insert screws through nose cone guard and upper shell flange.3. Tighten screws firmly.Figure 4 - Nose Cone Guard Assembly, 40/55T/70T Models OnlyNose ConeGuardScrewHot AirOutletUpperShellFlangePRODUCT IDENTIFICATIONUNPACKINGASSEMBLY