Desa VRL24NT Owner's Operation And Installation Manual

Also see for VRL30NT: OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL Owner's operating & installation manual Owner's manual

Desa VRL24NT Owner's Operation And Installation Manual Manual pdf 27 page image

110021-01AFor more information, visit www.desatech.comFor more information, visit www.desatech.com2727OPTIONAL POSITIONING OFTHERMOSTAT SENSING BULB(THERMOSTAT-CONTROLLED MODELS ONLY)FOR MASONRY AND FACTORY-BUILTMETAL FIREPLACEIf your log set cycles to pilot, but the room temperature drops to alower than ideal comfort level before the log set comes back on, youmay want to reposition the thermostat sensing bulb.The thermostat sensing bulb is located on the left side of the baseassembly. This location allows the thermostat to keep the roomtemperature at an ideal comfort level for most fireplace applica-tions. For positioning the thermostat sensing bulb elsewhere, anadhesive-backed mounting clip is available.1. Locate the gas valve assembly and thermostat sensing bulb(see Figure 44).2. Gently pull thermostat sensing bulb free from the retainingclamp.IMPORTANT: Do not force or bend the thermostat sensingbulb or capillary.3. The thermostat sensing bulb may be located to the lower rightfront side of fireplace. Determine location of sensing bulb, butdo not mount sensing bulb until step 4. If you have a masonryfireplace, see Figure 46 for location.If you have a factory-built metal fireplace, see Figure 47 forlocation.If your fireplace has glass doors, position sensing bulb directlybehind door gap on right bottom side (see Figure 48).4. The mounting clip must be a minimum of 3" from bottom offireplace to prevent crimping of capillary. Once you have de-cided on a location, clean the area thoroughly. Remove the pa-per backing from the adhesive on back of mounting clip. Pressthe clip into the new location so that the thermostat sensing bulbwill be positioned vertically with the capillary at the bottom(see Figure 49). Slide the thermostat sensing bulb into the clip.IMPORTANT: Do not crimp capillary.Figure 44 - Location of Gas Valve Assembly and ThermostatSensing BulbFigure 45 - Adhesive-backed Mounting ClipFigure 46 - Locating Thermostat Sensing Bulb on MasonryFireplaceFigure 47 - Locating Thermostat Sensing Bulb on Factory-builtMetal FireplaceAdhesive-backedMounting ClipThermostatSensing BulbFigure 48- Installing Thermostat Sensing Bulb Behind Glass DoorsFigure 49 - Positioning the Thermostat Sensing Bulb in theVertical Position with the Capillary at the BottomAdhesive-backedMounting ClipGlassDoorThermostat Sensing BulbCapillaryThermostatSensing BulbDo Not CrimpCapillaryAdhesive-backedMounting ClipAdhesive-backedMounting ClipThermostatSensing BulbOPTIONAL POSITIONING OF THERMOSTAT SENSING BULB(THERMOSTAT-CONTROLLED MODELS ONLY)For Masonry and Factory-Built Metal FireplaceGas ValveAssemblyThermostat Sensing Bulb RetainingClamp