Duevi CE60-8 Technical Manual
Also see for CE60-8: User manual
                                                    | |
Contents
| 
2910. PANEL TESTTo enter in “Panel Test”:1. Disarm the panel (even if already disarmed)2. Hold down the “#” button until the display shows “Panel Test”This test allows to verify if the activators and zones work correctly with the panel.Each time the panel receives a signal from a device/zone, it shows on display the device/zone name and emits a “beep”.To exit from “Panel Test” hold down the “#” button or wait until the panel exit (about 2 minutes).10.1. “RADIO LEVEL” TOOLInside the “Panel Test” is possible to enable the “Radio level” tool to visualize the radio signal quantity received by control panel from anyradio device. This tool allows to understand if the signal level that reaches the panel is strong or weak.To activate the tool, press the “X” button.11. PROGRAM THE RELAY OUTPUTS (AUX1, AUX2, AUX3)The relay outputs AUX1, AUX2 and AUX3 can be combined to control panel events: the output will switch when the combined event occurs.Event DescriptionON/OFF The AUX output is activated/deactivated by SMS commandThe SMS commands are *: xxxx#out onttt, xxxx#out on, xxxx#out offTEMPERATUREThis function can be used only in presence of the temperature probe (optional): the control panel uses the AUXoutput to drive the heating system, according to the measured and wanted temperature.The SMS commands are *: xxxx#temp onTT, xxxx#temp offRINGThe AUX output switches for 2 seconds when the control panel receives a phone call from known telephone number.When the AUX relay is set as RING, the call to control panel is used to switch the outputand therefore the VOICE MENU is DISABLED!GSM JAM In case the GSM modem detects a GSM jamming, the AUX output switches. Useful to connect alternative signallingsystems (ex.: PSTN, radio bridges, …).GSM FAILURE The AUX output switches in case of: no GSM signal, SIM failure or missing connection to the network. The outputswitches after about 10 minutes. The output backs to rest after 10 seconds from the end of problem.SILENT ALARM The AUX output is activated in case of Silent Alarm events.12:30 06/02/12 ▄Disarmed ▄ XPanel TestRadio Zone 02 P12:30 06/02/16 ▄Disarmed ▄ XPanel Test Rx= .Press long# |
Related manuals for Duevi CE60-8
manualsdatabase
Your AI-powered manual search engine