DuraVision FDF2304W-IP User Manual
                                                                          | |
Contents
| 
30 Chapter 4 Configuring the System4-4. Setting Display Positions of Camera ImagesSet the display position for images from the network camera.Procedure1. Select “Position”.Indicates thedisplay positionson the monitorscreen.1232. Configure the items.Item Detail Setting rangePosition Select a position to display a camera image.Set the network camera to the number of thedesired position for display.-Camera Name Display Select to display or not display the camera nameand time set on the monitor. (The camera name isdisplayed on the upper left of the image.)On/OffSequence Interval Set the interval for changing over the screen duringsequential display.5s to 60sAspect Ratio Mode Set which aspect ratio to apply when the aspectratio of the video delivered from the network cameraand the aspect ratio of the monitor image displayarea differ.Full/Aspect3. Select “Apply”.The setting complete screen is displayed. Select “OK”.Attention• All registered cameras must be set. A network camera can only be set for one display position. When there areincorrect settings, “Apply” cannot be selected. |
Related manuals for DuraVision FDF2304W-IP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine