Duracell Powerpack 300 Owner's Manual

Also see for Powerpack 300: Owner's guide Owner's guide

Duracell Powerpack 300 Owner's Manual Manual pdf 30 page image

195. Turn the compressor off before removing nozzleadaptor from valve stem.6. Remove nozzle adaptor from valve connector and storein storage compartments.Note: Leave the thumb latch in the open position forstoring to relieve pressure on the internal mechanisms.WARNING: Fire hazardAllow the compressor to cool down for 10 minutes aftereach 10 minutes of continuous operation.Connecting to an External BatteryYou can extend battery operating times by connectingthe Duracell ® Powerpack to a larger external battery.For example, an external 60 Ah battery givesapproximately five times the operating time of the Duracell ®Powerpack internal 12 Ah battery.WARNING: Fire hazardNever allow jump-start cables’ red and black clamps totouch each other or another common metal conductor. Thiscould cause damage to the unit and/or create a sparking/explosion hazard.WARNING: Fire hazardJump-start cable clamps must be connected positive topositive (red clamp to battery “+”) and negative to negative