Duron K7V266A User Manual
                                                                                 | |
Contents
| 
36IDE DevicesWhen you select one of the IDE devices, a submenu will pop up. Refer to thepicture below.Phienix – AwardBIOS CMOS Setup UtilityIDE Primary MasterIDE HDD Auto Detection Press Enter Item HelpIDE Primary Master Auto Menu Level" "Access Mode AutoTo auto-detect the HDD’s size, head… on thisCapacity 0 MB channelCylinder 0Head 0Precomp 0Landing Zone 0Sector 0This Menu is the same for all 4 IDE devices: Primary Master IDE 1 first device Primary Slave IDE 1 second device Secondary Master IDE 2 first device Secondary Slave IDE 2 second deviceValues MeaningIDE HDDAutoDetectionPress EnterPressing Enter will make the BIOS auto detect the IDE deviceon this channel. The result will be displayed below, startingwith the ‘capacity’ item. (These items are read only)Auto This will auto detect the device at each boot up.Manual This will use the setting set by the user. No auto detection atstart up will take place.IDE xxxNone This setting means no device is present. This will prevent theBIOS from looking for a device and speed up booting.CHS Selects the CHS access mode.LBA Logical Block Addressing, for HDD drives larger than 504MB(All modern HDDs)Large For very large HDDs.AccessModeAuto The BIOS will automatically detect the best access mode. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine