VIDEO QUALITYBESTBETTERGOODGOODHDMI video/audioComponent video and analog audioComposite video and analog audio(AV)Coaxial video/audioJACK TYPE CABLE CONNECTORDC IN(12V) SERVICEPORT ANT/CABLE INDC IN(12V) SERVICEPORT ANT/CABLE INDC IN(12V) SERVICEPORT ANT/CABLE INNote: The component and AV jacksare shared. This means you canconnect only one component or AVdevice at a time. We suggestupgrading to HDMI if your devicesupports it.AV cable optionAUDIO/VIDEO OUTAUDIO/VIDEOOUTVideoUsing component cables (BETTER)- OR -Using an AV cable (GOOD)Component cable optionNote: Connect the yellow videocomposite cable connector to thegreen VIDEO/Y jack.QUICKSETUP GUIDE16" LED TVDX-16E220NA16Which cables do you have?Your TV has several different jacks for connecting devices. For thebest video quality, use the best available connection.Note: Images do not necessarily represent the exact design of your television.Thank youfor purchasing this state-of-the-artDynex television. We hope you enjoythe quality and reliability of thistelevision for years to come.FIND YOURUSER GUIDE ONLINE!We are going green so a copy of yourUser Guide is not provided in the boxbut is available online.Go to www.dynexproducts.com,click Support & Service,enter DX-16E220NA16 in the box underManual, Firmware, Drivers & ProductInformation,then click Search.FeaturesFront viewBack viewOVERSTOP!Do not plug yourpower adapter inuntil all other deviceshave beenconnected.Using an HDMI cable (BEST)How do I connect my TV to an antenna or cable wall jack?MAKING CONNECTIONSHow do I watch TV (cable or satellite box) and/or connect a device such as aDVD or Blu-Ray Disc player, game console, or tablet?- OR -Before using your new product, please read these instructions to prevent any damage.Power indicatorRemote control sensorFrontC- OR -How do I prepare my TV for wall mounting?(not for use with a TV stand)A Carefully place your TV face-down on a cushioned, clean surface.B Remove the two screws that secure the stand column to your TV.Remove the stand column.D See the instructions that came with your wall mount for moreinformation about how to correctly mount your TV.START HEREHow do I attach the stand to my TV?You’ll need: Phillips screwdriver and a soft surface to lay the TV on.A Carefully place your TV face-down on a cushioned, clean surface.Bon the TV.Find the front of the stand, then hook the tab on the stand column throughthe slotC Push the TV stand into the stand column, then twist the stand to the rightside until it snaps into place.DCYour TV has four VESA mounting holes onthe back. If you attach a wall-mountbracket to the back of your TV, the bracketmust be securely attached, using allfour holes. If you do not use all fourmounting holes, your TV may fall andcause property damage or personal injury.See the documentation that came withyour wall mount for complete mountinginstructions.DX-RC5NA-15HOMEASPECTIncluded accessoriesRemote controland two AAA batteriesTV standPower adapterMulti-purpose jacks: You can plug anydevice that uses HDMI into either HDMIjack. However, certain devices must beplugged into the HDMI 1 jack.HDMI 1 HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)HDMI 1 HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)CABLEA BHDMI 1 HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)A B C