Dynex DX-19E310NA15 Quick Setup Manual

Also see for DX-19E310NA15: User guide

Wall mount installation guide(not included)DX-RC5NA-15HOMEASPECTBESTBETTERGOODGOODHDMI video/audioComponent video and analog audioComposite video and analog audio (AV)Coaxial video/audioJACK TYPE CABLE CONNECTORCABLEVIDEO QUALITYNote: Images do not necessarily represent the exact design of your television.Thank youfor purchasing this state-of-the-artDynex television. We hope you enjoythe quality and reliability of thistelevision for years to come.FIND YOURUSER GUIDE ONLINE!We are going green so a copy of yourUser Guide is not provided in the boxbut is available online.Go to www.dynexproducts.com,click Support & Service, enter yourmodel number in the box under Manual,Firmware, Drivers & Product Information,then click Search.FeaturesFront viewBack viewOVERSTOP!Do not plug yourpower cable in untilall other devices havebeen connected.Multi-purpose jacks: You can plug anydevice that uses HDMI into either HDMIjack. However, certain devices must beplugged into the HDMI 1 (DVI) jack.See the documentation that camewith your DVI device.Note: This TV only supports DVI video.Using an HDMI cable (BEST)How do I connect my TV to an antenna or cable wall jack?MAKING CONNECTIONSHow do I watch TV (cable or satellite box) and/or connect a device such as aDVD or Blu-ray disc player, game station, or camcorder?- OR -Before using your new product, please read these instructions to prevent any damage.CDC IN(12V) SERVICEPORT ANT/CABLE INDC IN(12V) SERVICEPORT ANT/CABLE INDC IN(12V) SERVICEPORT ANT/CABLE INDC IN(12V) SERVICEPORT ANT/CABLE INQUICKSETUP GUIDE19" LED TVDX-19E310NA15Included accessoriesRemote controland two AAA batteriesTV standM4 screws(8 mm length) (4 pcs.)Which cables do you have?Your TV has several different jacks for connecting devices. For thebest video quality, use the best available connection.Note: You can also connect a DVI device to your TV. See your online User Guide forconnection instructions. This TV only supports DVI video. Note: The component and AV jacksare shared. This means you canconnect only one component or AVdevice at a time. We suggestuprading to HDMI if your devicesupports it.AV cable optionHow do I prepare my TV for wall mounting?(not for use with a TV stand)A Carefully place your TV face-down on a cushioned, clean surface.B Remove the four screws that secure the stand column to your TV,then remove the stand column.C See the instructions that came with your wall mount for moreinformation about how to correctly mount your TV.START HEREHow do I attach the stand to my TV? (not for wall mounting)You’ll need: Phillips screwdriver and a soft surface to lay the TV on.A Carefully place your TV face-down on a cushioned, clean surface.B Find the front of the stand. Hook the tab on the stand column through the sloton the TV stand, then push the stand into place.C Secure the stand to your TV with the four provided screws.Power indicatorRemote control sensorFrontM4 (8 mm)screwsBA BHDMI 1(DVI) HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)HDMI 1(DVI) HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)A CMENUINPUTVOLCHHDMI 1(DVI) HDMI 2IN USBUSBDIGITALOUTPUT(COAXIAL)AUDIO/VIDEO OUTAUDIO/VIDEOOUTVideoUsing component cables (BETTER)- OR -Using an AV cable (GOOD)Component cable optionNote: Connect the yellow videocable cable connector to thegreen VIDEO/Y jack.Power adapter

/ 2

Related manuals for Dynex DX-19E310NA15