Dynex DX-24L230A12 User Manual

Also see for DX-24L230A12: Manual Specification sheet Quick setup guide Important information Guía De Instalación Rápida

Contents

Dynex DX-24L230A12 User Manual Manual pdf 17 page image

Making connections 13DX-24L230A12/DX-32L220A12/DX-46L261A12Connecting an HDMI or DVI device (best)To connect an HDMI or DVI device:1 Make sure that your TV’s power cord is unpluggedand the HDMI or DVI device is turned off.2 Connect an HDMI cable (not provided) to the HDMI1or HDMI2 jack on the back or side of your TV and tothe HDMI OUT jack on the HDMI or DVI device.3 If you are connecting a DVI device, connect an audiocable with stereo mini plug (not provided) to the PCAUDIO IN jack on the back of your TV and to theAUDIO OUT jack on the DVI device.To play from an HDMI or DVI device:1 Turn on your TV, then press INPUT to open theINPUT SOURCE list.2 Press or to select HDMI 1 or HDMI 2, then pressENTER.3 Turn on the HDMI or DVI device, then set it to theoutput mode. See the documentation that camewith the device for more information.Connecting a component video device(better)To connect a component video device:1 Make sure that your TV’s power cord is unpluggedand the component video device is turned off.2 Connect a component video cable (not provided) tothe COMPONENT IN/Y, PB, PR jacks on the back ofyour TV and to the COMPONENT OUT jacks on thecomponent video device.3 Connect an audio cable (not provided) to the L andR audio jacks on the back of your TV and to the L/RAUDIO OUT jacks on the component video device.To play from the component video device:1 Turn on your TV, then press INPUT to open theINPUT SOURCE list.2 Press or to select Component, then pressENTER.3 Turn on the component video device, then set it tothe output mode. See the documentation that camewith the device for more information.NoteWhen you connect the audio using the PC AUDIO INjack, the audio output is analog.NoteYou can also press HDMI repeatedly to select HDMI1or HDMI2.PC INDIGITAL OUTPUTVGAAUDIOHDMI 1Back of TVHDMI or DVI deviceHDMI cable or HDMIcable with DVI adapterNote: If you use a DVI adapter youneed to use a 3.5 mm audio cableto provide the audio signal.NoteWhen you connect the audio using the L and R audiojacks, the audio output is analog.NoteYou can also press COMP to select the componentDVD or Blu-ray player.COM ANT/ CABLE INYAUDIOPONENT INP BL RP RP RBack of TVComponent video deviceComponent video cableAudio cableCables are oftencolor-coded to matchcolor-coded jacks.