Dynex DX-32E250A12 User Manual

Also see for DX-32E250A12: Specifications User guide Quick setup guide

Contents

Dynex DX-32E250A12 User Manual Manual pdf 7 page image

Maintenance 5DX-32E250A12Remote controlGeneralMaintenanceCleaning• Clean your TV with a soft, dry cloth. If surfaces are extremelydirty, use a soft cloth dampened with a weak detergent solution.• Use an eyeglass cleaner to clean the screen. Never use alcohol,paint thinner, or benzine.• Before using a chemically treated cloth, read the instructions thatcame with the cloth.Problem SolutionRemote control does notwork. • Make sure that the power cord is correctly connected toyour TV and a power outlet.• Make sure that there are no obstructions between theremote control and the remote control sensor on thefront of the TV.• Point the remote control directly at the remote controlsensor on your TV. For the location of the remote controlsensor, see “Front” in the online User Guide.• Make sure that the batteries are installed correctly. See“Installing remote control batteries” in the online UserGuide.• Replace dead batteries with new batteries. See“Installing remote control batteries” in the online UserGuide.Trouble programming yourexisting universal remotecontrol.• See instructions and a table of common codes in“Programming a different universal remote control” inthe online User Guide.• Codes are subject to change. For up to date codes, go towww.dynexproducts.com/remotecodes.• Replace dead batteries with new batteries. See“Installing remote control batteries” in the online UserGuide.• Refer to the User Guide that accompanied your universalremote control and contact the manufacturer ifproblems persist.Problem SolutionNo power • Make sure that the power cord is correctly connected toyour TV and a power outlet.• Unplug the power cord, wait 60 seconds, then plug thecord back in and turn on your TV.• Other devices (for example, surround sound receiver,external speakers, fans, or hair dryers) may beinterfering with your TV. Try turning off one device at atime to determine which device is causing interference.Once you have determined which device is causinginterference, move it further from the TV to eliminatethe interference.“No signal” error messageis displayed • Press INPUT and make sure that you have selected thecorrect input for the device or service you are trying touse.• If you are using a cable or satellite box, use the remotethat came with that box to change channels.• Make sure you have the correct input selected to viewchannels from the cable or satellite box.After Auto Channel Search,there are no channels • Reception can vary by channel depending on thebroadcast power level of a given station. Contact yourcable or satellite TV provider.• Make sure the antenna or cable/satellite TV isconnected securely to your TV.• Try replacing the cable between the antenna/cable orcable/satellite box and your TV.One or more channels donot display. • Make sure that the channels are not blocked. See“Setting parental control levels.”• Make sure that the channels are not hidden. Thechannel may have been deleted from the channel list.You can tune to the channel by pressing the numberbuttons or you can add the channel back to the channellist. See “Hiding channels” in the online User Guide.• If you are using a cable or satellite box, use the remotethat came with that box to change channels.• Make sure you have the correct input selected to viewchannels from the cable or satellite box.• If you are using an antenna, the digital channel signalmay be low. To check the digital channel signalstrength, see “Checking the digital signal strength” inthe online User Guide.Password is lost. • Enter 9999 to access parental controls, then set a newpassword. See “Setting or changing the password” inthe online User Guide.Some settings cannot beaccessed. • If a setting is grayed, the setting is not available in thecurrent video input mode.TV cabinet creaks. • When the TV is in use, the temperature rises naturallyand may cause the cabinet to expand or contract whichcan cause a creaking noise. This is not a malfunction.Control buttons do notwork • Make sure that the Button Lock option is set to Off. See“Locking control buttons” in the online User Guide.• Unplug the power cord, wait a few seconds, then plugthe cord back in and turn on your TV.TV keeps turning off • Make sure that the sleep timer is not turned on. See“Setting the sleep timer” in the online User Guide.NoteIf the problem is not solved by using thesetroubleshooting instructions, turn off your TV, thenturn it on again.Problem Solution