Understanding the basics 13DX-32L100A11Channel menuNotes:Depending on the signal source selected, you may see different options onyour screen. The above menus are shown in TV mode.Menu items that are not selectable are grayed out. Menus in this manualare described in TV mode, unless otherwise indicated.The illustrations and screens shown in the manual are for explanationpurposes and may vary from the actual screens on your TV.Navigating the menusAdjusting basic settingsTo adjust basic settings:1 Press MENU. The Picture menu opens.2 Press or to highlight Setup, then press . The Setup menuopens.3 Press or to highlight an option, then press ENTER to enterthe sub-menu. You can select:• Parental Controls—Control which programs/movies yourchildren can watch, based on industry ratings.• Time—Set the clock and sleep timer.• Closed Caption—Turn closed captioning on or off. Also letsyou set closed caption options.• Menu Settings—Set menu language and menutransparency.• VGA Settings—Lets you adjust picture settings to optimizea computer display. (This menu becomes available onlywhen a computer display is connected to the television.)• Input Label—Create a unique name for a device connectedto your TV’s input jacks.• Restore Default—Reset most TV settings for the currentsource to factory default values.• Audio Only—Turn off the TV picture and listen to audioonly.4 Press MENU to return to the previous menu, or press EXIT toclose the menu.SelectMove MENU ExitAuto ScanF avoritesShow/HideChannel No.Channel LabelDTV Signal:AudioTV SourceSetupPictureAntennaChannel2.1NormalWGBH-SDPress to display the Main menu.Press to select menus, to adjust selecteditems, or move on-screen cursor left or right.Press to select the menu items.Press to confirm your selection or enter asub-menu.Press to return to the previous screen.Press to close the menu.PictureSelectMove MENU ExitPicture ModeContrastBrightnessColorTintAdvanced VideoAudio Setup ChannelCustom7040600Sharpness 50Backlight 30MENU ExitTimeClosed CaptionMenu SettingsVGA SettingsInput LabelRestore DefaultAudio OnlyAudio ChannelParental ControlsOffSetupPictureSelectMove