Dynex DX-32L151A11 User Manual

Also see for DX-32L151A11: Firmware update Quick setup guide Quick setup guide User guide Guía De Instalación Rápida

Making connections 9DX-32L151A11/DX-37L130A11Notes:• The AC plug on the TV may be different from the one shown.• Make sure that you only use the type of power source indicated on themarking label.• Always unplug the power cord when not using the TV for a longperiod of time.Connecting an HDMI deviceNote: If your device has an HDMI connection, we recommend you use thatto get the best quality possible.To connect an HDMI device:• Connect one end of an HDMI cable (not included) to the HDMI 1jack on the back of your TV or HDMI 2 jack on the side of your TV,then connect the other end of the cable to the HDMI OUT jack onthe HDMI device.Note: To connect a DVI device, use a DVI to HDMI adapter cable to connectto the HDMI jack on the TV, then connect an audio cable to thePC IN AUDIO jack on the back of the TV.To play from the HDMI device:1 Turn on the TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select HDMI 1 or HDMI 2, then press ENTER.Note: You can also press HDMI once to select HDMI 1 or twice to selectHDMI 2.3 Turn on the HDMI device, then set it to the correct mode. Refer tothe instructions that came with the HDMI device.Connecting a component video deviceComponent cables often have red, green, and blue color-coded videoconnectors and red and white audio connectors. Match the colors whenmaking connections.To connect a component video device:1 Make sure that your TV’s power cord is unplugged and thecomponent video device is turned off.2 Connect a component video cable to the COMPONENT OUT jackson the component video device.3 Connect the other end of the component video cable to theCOMPONENT jacks on the back of your TV.4 Connect an audio cable (not included) to the AUDIO OUT jacks(L/R) on the component device.5 Connect the other end of the audio cable to the COMPONENTAUDIO-R and AUDIO-L jacks on the back of your TV.To play from the component video device:1 Turn on the TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select Component, then press ENTER.Note: You can also press COMP once to select Component.3 Turn on the component video device and start playback. Refer tothe instructions that came with the component video device.Connecting an antenna, cable TV, orsatellite TV boxTo connect an antenna, cable TV, or satellite TV box:• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLEIN jack on the back of the TV, then connect the other end of thecable to the antenna or cable TV wall jack.• If you are connecting a satellite TV or cable box, you can use oneof the following (if available):• Acceptable - 75-ohm coaxial cable.Back of TVHDMI deviceHDMI cableBack of TVComponent video deviceComponent video cableAudio cable75-Ohm coaxial cableWall jackBack of TV