Dynex DX-32L152A11 User Manual

Also see for DX-32L152A11: Quick setup guide Important information Guía del usuario Guía De Instalación Rápida Guide de l'utilisateur

Dynex DX-32L152A11 User Manual Manual pdf 13 page image

Making connections 9DX-32L152A11To connect an antenna, cable TV, or satellite TV box:• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLEIN jack on the back of the TV, then connect the other end of thecable to the antenna or cable TV wall jack.Notes:• We recommend using a 75-Ohm, coaxial cable to reduce interferenceand noise that may be caused by radio wave transmissions.• Do not bundle the coaxial cable with the power cord or any othercables.• If you are using an antenna and reception is not good, contact aservice technician to adjust the antenna.Connecting a VCR, camcorder, or gameconsoleNote: If the VCR, camcorder, or game console has component jacks(better), or an HDMI jack (best), connect them using the best availableconnection.To connect a VCR, camcorder, or game console:1 Make sure that your TV’s power cord is unplugged and the VCR,camcorder, or game console is turned off.2 Connect one end of a standard AV cable (not included) into theAV VIDEO jack on the back of the TV, then connect the other endof the cable to the AV OUT VIDEO jack on the external device.3 Connect the audio connectors of the AV cable (the red and whiteconnectors) to the AV OUT AUDIO jacks of the external device,then connect them to the AV L and R jacks on the back of your TV.To play the external AV device:1 Turn on the TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select AV, then press ENTER.Note: You can also press VIDEO once to select AV.3 Turn on the device, then start playback on the device.Connecting a computerTo connect a computer:1 Make sure that your TV’s power cord is unplugged and thecomputer is turned off.2 Connect one end of a VGA cable (not included) to the VGA jack onthe back of the TV, then connect the other end of the cable to theVGA jack on the computer.3 Connect one end of an audio cable with a stereo mini-plug (notincluded) to the PC/DVI AUDIO IN jack on the back of the TV,then connect the other end of the cable to the AUDIO OUT jackon the computer.To play video from the computer:1 Turn on the TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select VGA, then press ENTER.3 Turn on the computer, then adjust the computer displayproperties as needed.ANT/CABLE IN jack onthe back of the TVAntenna, cable TV,or satellite box75-Ohm coaxial cableANT/CABLE IN jack onthe back of the TVHome antenna terminal(75 ohm)COMPAV VIDEO L RY Pb PrLR ANT/CABLE IN DIGITALAUDIO OUTVCR, camcorder, or game consoleAV cableBack of TVNote: Cables are oftencolor-coded to connectors.Connect yellow to yellow,red to red, and white towhite.HDMI2 HDMI 1PC/DVI AUDIO IN VGABack of TVComputerVGAcableAudio cableDX-32L152A11_10-0615_MAN_ENG_V1.book Page 9 Thursday, July 22, 2010 10:30 AM