Dynex DX-32L200A12 User Manual

Also see for DX-32L200A12: Manual Firmware update Important information Specifications Quick setup guide

Contents

Dynex DX-32L200A12 User Manual Manual pdf 16 page image

12 Making connectionsDX-32L200A12/DX-37L200A12/DX-46L262A12Connecting an HDMI or DVI device (best)To connect an HDMI or DVI device:1 Make sure that your TV’s power cord is unpluggedand the HDMI or DVI device is turned off.2 Connect an HDMI cable (not provided) to the HDMI1or HDMI2 jack on the side of your TV and to theHDMI OUT jack on the HDMI or DVI device.3 If you are connecting a DVI device, connect an audiocable with stereo mini plug (not provided) to the Land R AUDIO jacks on the side of your TV and to theAUDIO OUT jack on the DVI device.To play from an HDMI or DVI device:1 Turn on your TV, then press INPUT to open theINPUT SOURCE list.2 Press or to select HDMI 1 or HDMI 2, then pressENTER.3 Turn on the HDMI or DVI device, then set it to theoutput mode. See the documentation that camewith the device for more information.Connecting a component video device(better)To connect a component video device:1 Make sure that your TV’s power cord is unpluggedand the component video device is turned off.2 Connect a component video cable (not provided) tothe COMPONENT IN/Y, P B, PR jacks on the side ofyour TV and to the COMPONENT OUT jacks on thecomponent video device.3 Connect an audio cable (not provided) to the L andR audio jacks on the side of your TV and to the L/RAUDIO OUT jacks on the component video device.To play from the component video device:1 Turn on your TV, then press INPUT to open theINPUT SOURCE list.2 Press or to select Component, then pressENTER.3 Turn on the component video device, then set it tothe output mode. See the documentation that camewith the device for more information.NoteWhen you connect the audio using the L and RAUDIO jacks, the audio output is analog.NoteYou can also press HDMI repeatedly to select HDMI1or HDMI2.Side of TVHDMI or DVI deviceHDMI cable or HDMIcable with DVI adapterNote: If you use a DVI adapter youneed to use a 3.5 mm audio cableto provide the audio signal.NoteWhen you connect the audio using the L and R audiojacks, the audio output is analog.NoteYou can also press COMP to select the componentvideo device.Side of TVComponent video deviceComponent video cableAudio cableCables are oftencolor-coded to matchcolor-coded jacks.