Dynex 40" LED TV 13DX-40D510NA15www.dynexproducts.comConnecting a cable or satellite boxMany cable or satellite TV boxes have more than one connection type. To get the best video, you should use the bestconnection type available. For more information, see “What connection should I use?” on page 12.HDMI (best)1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on thecable or satellite box.4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.5 Press INPUT to open the INPUT SOURCE list.6 Press S or T to highlight HDMI1 or HDMI2, then press ENTER.NoteAn HDMI cable carries both audio and video. You do not need touse any audio cables.HDMI cableCable orsatellite boxSide of TVHDMI cableconnectorHDMI jackOn your TV
