16 Adjusting the soundDX-32L/37L/40L/46L3 Press or to highlight Setup, then press . The Setup menuopens.4 Press or to highlight VGA Settings, then press ENTER. TheVGA settings menu opens.5 Press or to highlight an option, then press or to adjustthe option. You can adjust:• H-Position—Moves the image right or left• V-Position—Moves the image up or down• Clock—Adjusts the sample frequency• Phase—Adjusts the focus of stable images• Auto—Automatically adjusts the image settings such asposition and phase6 Press MENU to return to the previous menu, or press EXIT toclose the menu.Adjusting the soundAdjusting the soundTo adjust the sound:1 Press MENU. The on-screen menu opens.2 Press or to highlight Audio, then press . The Audio menuopens.3 Press or to highlight an option, then press or to adjustthe option. You can select:• Sound Mode—Selects the sound mode. You can select:• Standard (for normal programs)• News (for news programs)• Music (for musical programs)• Movie (for movies)• Custom (for a customized sound mode).Note: You can also press AUDIO one or more times to select thesound mode.• Bass—Adjusts the low sounds.• Treble—Adjusts the high sounds.• Balance—Adjusts the balance between the left and rightaudio channels.• Surround—Turns the surround sound effect on or off.• AVC—(Auto volume control) Equalizes the overall volumelevels for all channels.• Digital Output—(digital channels only) Selects the digitalaudio output mode. You can select RAW (outputs audio in itsoriginal format) or PCM (outputs the audio in PCM mode, ifavailable).• Audio Language—(digital channels only) Selects analternate audio language, if available.4 Press MENU to return to the previous menu, or press EXIT toclose the menu.Selecting the audio modeYou can select the audio mode for analog channels.To select the audio mode for analog channels:• Press MTS/SAP on the remote one or more times. You can select:• MONO—Select this option if there is noise or static on weakstereo broadcasts.• STEREO—Select this option for programs broadcast instereo.• SAP—Select this option to listen to a secondary audioprogram, if available.Note: Mono is automatically selected if the program is broadcast inmono.To select an audio track for a digital channel:• Press MTS/SAP. The audio track plays if one is available.MENU ExitTimeClosed CaptionMenu SettingsInput LabelRestore DefaultAudio OnlyAudio ChannelParental ControlsOffSetupPictureSelectMoveVGA SettingsMove MENU ExitV . PositionClockPhaseAudio ChannelH . PositionSetupPictureAuto70406050SelectPictureSelectMove MENU ExitPicture ModeContrastBrightnessColorTintAdvanced VideoAudio Setup ChannelCustom7040600Sharpness 50Backlight 30PictureMENU ExitSound ModeBassTrebleBalanceSurroundDigital OutputAudio LanguageSetup ChannelCustom57500AVCAudioOffEnglishRA WOffSelectMoveDX-32L-37L-46L150A11_09-0919.book Page 16 Tuesday, November 24, 2009 11:42 AM