40" LCD HDTVQUICK SETUP GUIDEDX-40L150A11Remote controland2 AAA batteriesComponentvideo cableAC powercordTV stand and screws (4)Quick Setup GuideHDMI cable(not included)HDMI deviceBack of TVL/R audiocable200 mm M6 screws200 mmBack of TV Cable box or satellite receiverHDMI cableVideo or S-Video cableComponent cableWall jack75-Ohm coaxial cableAV cableBack of TVVCRAudio cableS-VideocableBack of TVVCRAudio cableDigital sound systemBack of TVDigital optical cableBack of TV Audio amplifierAudio cableComputerBack of TVVGA cableAudio cableBack of TVGame consoleCamcorderSide of TVAV cableAudio cableComponent video deviceBack of TVComponentvideo cableSide buttonsInstalling the stand1 Remove the stand from the box and place it on a table or bench.2 Lay the TV on a flat, cushioned surface.3 Align the stand with the TV, as shown.4 Secure the stand to the column with the four screws provided.Installing a wall-mount bracket1 Lay your TV face down on a table or bench. Make sure that you put down asoft cushion or cloth so that your TV is not scratched.2 Remove the four screws that secure the TV to the base, then remove the base.3 Remove the four screws holding the stand bracket to the TV, then removethe stand bracket.4 Secure the wall-mount bracketto the back of your TV usingthe screws provided with thewall-mount bracket.Setting up your remote control1 Press down on the battery compartment cover lock, then remove theremote control cover.2 Insert two AAA batteries into the battery compartment. Make sure that the+ and – symbols on the batteries match the + and – symbols in the batterycompartment.3 Replace the cover. Make sure that the lock snaps into place.To program your existing remote control to work with your Dynex TV, see thetable below for common codes. If you have problems programming yourremote, or need a different remote control code, visitwww.dynexproducts.com for the latest remote control code information.Connecting a DVD or Blu-ray DVD player, cablebox, satellite receiver, or game stationUsing HDMI (best)Using component (better)Note: Cables are often color-coded to connectors. Connect yellow toyellow, red to red, and white to white.Using S-video (fair)Using composite (fair)Connecting an antennaConnecting a home theater systemUsing an analog audio cable:Note: Cable connectors and jacks are often color-coded. Match the colorswhen you connect the AV cable.Using a digital audio cable:Note: The DIGITAL OUTPUT jack only works with digital TV channels.Connecting a computerPhilipsPHDVD5, PH5DSS,PMDVR8, PDVR8115DirectTVRC2310463RCARCU807135One for AllURC-66900464SonyRM-VL6008043ComcastM10570463Dish NetworkVIP508, VIP622720MotorolaDRC8000463TIVOSeries 3, HD0091Universal remote control makers and models Set-top box makers and modelsUniversal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)