Dynex DX-46L260A12 User Manual

Also see for DX-46L260A12: Manual Quick setup guide Important information Specification sheet Guía del usuario

Dynex DX-46L260A12 User Manual Manual pdf 14 page image

10 Making connectionsDX-46L260A12Using coaxial (good)To connect a cable or satellite box using coaxial:1 Turn off your TV and all connected equipment.2 Connect the incoming cable from the cable wall jack to thecable-in jack on the cable or satellite box.3 Connect a coaxial cable (not included) to the ANT/CABLE IN jackon the back of your TV and to the coaxial out jack on the cable orsatellite box.4 Turn on your TV, then turn on the cable or satellite box.5 Go through the setup wizard on page 16.Connecting an antenna or cable TV (nobox)To connect an antenna or cable TV (no box):1 Turn off your TV and all connected equipment.2 Connect a coaxial cable to the ANT/CABLE IN jack on the back ofyour TV and to the antenna or cable TV wall jack.3 Turn on your TV.4 Go through the setup wizard on page 16.Notes• Use a coaxial cable to eliminate interference andnoise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.COMPONENT INCable or satellite boxBack of TVCoaxial cableNotes• Use a coaxial cable to eliminate interference andnoise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.• If the antenna is not installed correctly, contactqualified service personnel to correct theproblem.COMPONENT INBack of TVCoaxial cable