Dynex DX-CKB102 User Manual

Also see for DX-CKB102: Manual

Contents

Installing your keyboard and mouse 5MouseA high quality optical mouse is included with this keyboard. Optical technologycan precisely detect the motion of the mouse on most surfaces. However, avoidusing the optical mouse on any reflective or metallic surfaces, or surfaces with acomplex pattern.Avoid using the mouse under direct sunlight, or in extremely hot, cold, or dustyenvironments.Installing your keyboard and mouseSystem requirementsFor IBM compatible computers must meet the following system requirements:• USB or PS/2 ports• CD or DVD drive (to load the drivers)• Operating systems: Microsoft Windows 95, Windows 98, Windows NT,Windows 2000, Windows ME, or Windows XPConnecting the keyboard and mouseTo connect the keyboard and mouse:1 Turn off the computer.2 Connect the USB plug on the keyboard to a USB port on your computer.If no USB connector is available, use the USB to PS/2 converter on thekeyboard cable and connect it to the PS/2 keyboard port.3 Connect the USB plug on the mouse to a USB port on your computer.If no USB connector is available, use the USB to PS/2 converter on themouse cable and connect it to the PS/2 mouse port.4 Turn on your computer.DX-CKB102 Keyboard Combo - combined.fm Page 5 Monday, January 9, 2006 8:25 AM