10 Troubleshooting4 Click Internet Protocol (TCP/IP) in the This connection uses thefollowing items list, then click Properties. The Internet Protocol (TCP/IP)Properties dialog box opens.5 Click Use the following IP address, then type values for:• IP address–The IP addresses on your network must be within the samerange. For example, if one computer has an IP address of 192.168.0.2,the other computers should have IP addresses that are sequential, like192.168.0.3 and 192.168.0.4• Subnet mask–The subnet mask must be the same for all thecomputers on the network. The subnet mask is usually 255.255.255.0.• Default gateway–The default gateway is the LAN IP address of yourwireless router. For information, see your router’s user guide.6 Click Use the following DNS server addresses, then type your router’sLAN IP address. For information, see your router’s user guide.7 Click OK.TroubleshootingIf you are having problems with your network, check the following:VERIFY EACH COMPUTER ’S IDENTIFICATION• Make sure that each computer on your network has a unique computername. If more than one computer has the same computer name, thenetwork will not work.• Make sure that all the computers in your network have the same workgroupname.Dynex5x7-multi.book Page 10 Friday, September 9, 2005 12:32 PM