6 DX-E1022 Click Install Driver to start the installation wizard.3 Click Next, then Finish when the wizard is complete.4 Click EXIT to close the Dynex PCI Adapter window.Using Wake On LANYour DX-E102 features Wake On LAN (WOL). This feature lets a remote computer “wake” yourcomputer when it is in Standby or Hibernate mode.For more information about WOL, see your user guide.Note: The WOL feature is system dependent. In addition to the following instructions, youmay need to download WOL software from Intel or another manufacturer’s Web site. Seeyour computer’s user guide for specific BIOS settings.To enable WOL:1 Turn on your computer and press Delete or F1 when prompted to enter the BIOSSetup utility. The keys you press to enter the BIOS Setup utility may vary, so see yourcomputer’s user guide for more information.2 Enable the WOL feature or power-on feature of the computer. The name of this featuredepends on the system, but it may be located in a category such as “PowerManagement.” See your computer’s user guide for more information regarding theBIOS Setup utility and BIOS settings.Note: The LED on your DX-E102 will turn off when your computer is shut down, even whenWOL is enabled.