Setting up the network card 11Configuring a dynamic IP addressWhen the drivers are installed, the default setting is to obtain an IP addressdynamically through a DHCP server.If you need to check or change the settings, do the following:1 Click Start, Settings, then click Control Panel. The Control Panel windowopens.2 Double-click Network. The Network window opens.3 Click TCP/IP, then click Properties. The TCP/IP window opens. If TCP/IP isnot present, see “Installing TCP/IP” on page 8.Dynex5x7-multi.book Page 11 Thursday, September 8, 2005 11:07 AM
