IIEEEEEE11339944 CCaarrdd BBuuss AAddaapptteerrInstallation GuideIntroductionThank you for purchasing IEEE1394 Card Bus Adapter, the adapter is a 32Bit bus interfacerunning up to 400Mbps high-speed band width. With the advantage of hot-plug swappable andPlug n Play features you can easily install it in seconds. The installation is simple, just slide theadapter into the type II Card Bus slot of your notebook and it is done.The Card Bus Adapter allows the connection of your notebook with Fire Wire multimedia andconsumer devices such as high-speed mass storage devices, DVD-ROM Drives, Scanners and latestDV Camcorders. You will be able to edit and create your digital movies right from your notebookanytime, anywhere.Hardware Installation1. Slide the Card Bus adapter into slot of your notebook till it is seatedfirmly. It should feel locked (Please refer to your PC card installationguide).2. Windows will automatically detect the IEEE1394 Controller after theCard Bus adapter is inserted.3. When connected, your IEEE 1394 peripherals and OS will prompt toinstall relative driver. (Please refer to your peripheral guide.)Using self-powered IEEE 1394 devicesTo avoid the crashing your system and the overload of powerconsumption, we have designed the Card Bus adapter with no bus poweroutput. Therefore you will need to connect the self-powered peripherals such as D8, DVcamcorder, DVD players etc to work properly. Otherwise a bus powered peripheral connected tothe adapter may not being detected by Windows OS and not work.Verify if your Card Bus adapter is properly installedTo ensure your adapter has been installed successfully, just click Device Manager on WindowsOS. You should have the entry title of "1394 Bus Controller". Click on the "+" sign for sub-entry to reveal, "VIA OHCI Compliant IEEE 1394 Host Controller". With this, you can besure that the adapter is ready to work.P/No: DX-FC202