Dynex DX-IPDR3 User Manual

Also see for DX-IPDR3: Manual Guía del usuario Guide d'utilisation

Contents

Dynex DX-IPDR3 User Manual Manual pdf 15 page image

DX-IPDR3 15MaintainingReplacing the remote control batteryTo replace the battery:1 Release the battery by inserting the tip of a pen or similar toolinto the small hole at the top right of the battery compartment.2 Push the pen /tool into the mechanism, then slide it toward leftand hold it.3 Pull the battery compartment out from the bottom.4 Take out the used battery and replace it with a new one.5 Push the battery compartment back into the remote control.TroubleshootingNo video/ audio/ imageon TV• Make sure that your iPod/iPhone is on the compatible list inthe Specifications on page 11.• Make sure that your video cable is connected firmly andcorrectly between the TV and your iPod dock• Make sure that your monitor is turned on and the videochannel is correct• Make sure that the video format is correct - NTSC / PALNo audio with speakers • Make sure the AV cable is connected firmly and correctlyThe remote control isn'tworking• Make sure you pulled the plastic tab if this is a first use• The battery could be dead, replace it• Make sure you are aiming at the remote sensor on the frontof the dock