Dynex DX-KBOM2 User Manual

Also see for DX-KBOM2: Manual

Contents

Dynex DX-KBOM2 User Manual Manual pdf 3 page image

Setting up the keyboard combo 3Installing the receiverTo connect the receiver:1 Turn on the computer.2 Plug the USB connector of the receiver into the USB port on thecomputer.3 Adjust the two-channel switch on the back of the keyboard to eit herchannel 1 or 2 to select the keyboard channel.4 Adjust the two-channel switch inside the battery compartment of themouse to eit her channel 1 or 2 to select the mouse channel.Linking the mouse with the receiverNote: Link the mouse and keyboard within the effective distance of39 inches (1 meter) for the mouse and 59 inches (1.5 meter) for thekeyboard.To link the mouse with the receiver:1 Turn on your computer.2 Press the ID link button on the receiver. There will be a 15-seconddelay while the receiver links to the keyboard and the mouse.Within that 15-second delay:• Press the ID link button on the keyboard, then press the ID linkbutton on the receiver.• Press the ID link button on the mouse to complete the linkingprocess. The LED indicator on the receivers changes fromflashing to green.The keyboard and mouse are designed with Smart Link. After thelinkage procedure is complete, you don’t have to re-link themouse, even if you change batteries or restart the computer.3 If the mouse does not link with the receiver, repeat the ID linkingprocess in Step 2.4 If there is interference when using the keyboard or mouse withthe selected channel, re-link the keyboard and mouse byrepeating Step 2. There are 256 changeable IDs for a singlechannel.Installing the driverTo install the mouse or keyboard driver:Note:The driver supports Windows 2000/ ME/XP.1 Remove any existing mouse or keyboard drivers completely.2 Insert the driver CD in your computer, then select the mouse orkeyboard driver to be installed.3 Select a language for installation.The operating system automatically installs the driver throughauto-install.4 Restart the computer.A Mouse icon will appear on the Windows task bar after yousuccessfully finish the installation.A Keyboard icon will appear on the Windows task bar after yousuccessfully finish the installation.Programming the mouseA programmable key on the mouse allows you to set a number of mouseproperties.To program the mouse:1 Double-click the Mouse icon on the Windows task bar. A mouseprogramming screen displays.CH1CH2Channel switchChannel switch