Dynex DX-LDVD19-10A User Manual

Also see for DX-LDVD19-10A - 19" LCD TV: Quick setup guide Service manual Guía del usuario Guide de l'utilisateur

Using the remote control 7DX-LDVD19-10ARemove the batteries if you do not intend to use the remote control for anextended amount of time.Do not dispose of batteries in a fire. Dispose of them as hazardous waste.Aiming the remote controlTo use the remote control:• Point the remote control towards the remote sensor on the frontof your TV. The remote control’s range is about 26 ft. (8 m).Notes:Do not expose the remote control to shock or liquids.Do not use the remote control in an area with high humidity.Do not place the remote control in direct sunlight.Do not place objects, such as furniture, between the remote control andthe remote sensor.The remote control may not work if direct sunlight or bright light shines onthe remote sensor. Either move your TV or change the angle at whichyou use the remote control.Programming a universal remote controlto work with your TVYou can operate your TV with a new or existing universal remotecontrol.To program a universal remote control:1 Find the code for your universal remote control by identifying itsmodel (or your set-top box’s remote control manufacturer andmodel) on the charts below, then make note of the numberedcode below it. You will use the numbered code to program yourremote control to work with your TV.Codes for other remote controls are available online at:www.dynexproducts/universalcontrolcodes.aspxTips:• The brand name is often visible on the front of the universal remotecontrol, and the model number is often visible on the back.• If your universal remote control isn’t listed on the chart, refer to youruniversal remote control’s instructions and try codes for the brandsOrion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may needto try several codes before finding a match.2 Follow your universal remote control’s instructions to enter thecode you found in Step 1.Tips:• If your universal remote control has a code search feature, run a codesearch to identify a code that matches your TV. See your universalremote control’s instructions for details.• If your universal remote control has a “Learn” feature, you canmanually program it using your TV remote to “teach” the commandsone at a time. See your universal remote control’s instructions fordetails.3 If all else fails, you must use a different universal remote controlthat can operate both your set-top box and your TV. Five suchremotes are listed on the chart, but many other compatiblemodels are available in the market.For more help, call technical support for your universal remotecontrol or set-top box manufacturer, or call the Dynex CustomerCare Center at 1-800-305-2204.Dynex TV codes for universal remote controls(for all Dynex TVs manufactured after Jan. 1, 2007)Universal remote control manufacturer and modelPhilipsPHDVD5,PH5DSS,PMDVR8,PDVR8RCARCU807One for AllURC-6690SonyRM-VL600115 135 0464 8043Set-top box manufacturer and modelComcastM1057DishNetworkVIP508,VIP622MotorolaDRC800TIVOSeries 3, HDDirectTVRC230463 720 0463 0091 10463DX-LDVD19-10A_09-0340.book Page 7 Tuesday, April 28, 2009 4:43 PM