Dynex DX-NBKIT20 User Manual
Also see for DX-NBKIT20: Manual
                                                                | |
Using the USB 2.0 4-port hub 3Features• Compliant with Universal Serial Bus Specification Revision 2.0 (data rate1.5/12/480 Mbps)• Connects up to 127 USB devices (with multiple USB hubs)• Bus power and self-power modes• Plug-and-play• 1 upstream and 4 downstream USB ports included• Over-current detection and protection• 1 red LED power indicatorSystem requirements• Desktop or notebook computer with USB port• One of the following operating systems (no driver needed):• Windows® 98/SE or newer• Mac™ OS XInstalling the USB hubTo install the hub:1 Optional: Connect the power adapter (not included) to the power jack onthe hub. For more information, see “Power adapter” on page 5.2 Plug the cable into the type A connector on the computer.3 Optional: Plug the power adapter into an AC power outlet.After you connect this hub to a computer, the computer detects the hub andinstalls the required drivers.DX-NBKIT20-combo.fm Page 3 Friday, May 6, 2005 4:46 PM |
Related manuals for Dynex DX-NBKIT20
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine