Dynex DX-PS10MC Quick Setup Manual

Also see for DX-PS10MC: User guide

Contents

specifications

PowerDoor OpenOverheatOverloadFeaturesGoECO™ Power-Saving Technology (patent-pending) consumes energyonly during actual shredding. This means the shredder does not use powerwhen it is in stand-by mode.Control panelLEDPower switchAUTO The shredder starts automatically when an item is inserted into the paper or disc slot.When the item has passed through the slot, the shredder stops.Caution: Always feed paper in as straight as possible.Caution: Do not insert more than ten sheets of paper, one credit card, or one disc at a time.REV Use the reverse setting to clear a paper jam or to pull out unshredded paper.Caution: Never try to clear a jam by using REV when the wastebasket is full. This couldmake the jam worse.OFF Turns off the shredder.Warning: Always turn off the shredder when it is not in use.Power Lights green when the shredder is in use.Turns off when the shredder is in stand-by (power saving) mode.Door Open Lights yellow if the wastebasket is opened or the shredder head is notmounted correctly.Overheat/Overload Lights red when the shredder is jammed or overheated. You have inserted moresheets of paper than recommended or the shredder has been used too long.Please reduce the number of sheets or stop shredding until the light turns off.QUICK SETUP GUIDE10-sheet Microcut DVD/CD Paper ShredderDX-PS10MC

/ 2

Related manuals for Dynex DX-PS10MC