Dynex DX-S114251 Quick Setup Manual
Also see for DX-S114251: Limited warranty
  |
DX-S114251/DX-TVSRGETravel Surge Protector / Parasurtenseur de voyage /Protector contra sobrevoltaje de viajePackage contents• Travel surge protector• Quick Setup GuideFeaturesUSB charger/surge protection: The USB port(s) can beused to power/charge devices with USB power/chargingcapability; and also provide surge protection to connecteddevices.LED indicator (model DX-S114251 only): A lit'Protected' green LED indicates that the surge protectionfeature is working properly. If the LED does not light, itmeans that either the unit has reached its maximum surgeabsorbtion capacity and must be replaced, or that theoutlet in which the unit is plugged into is not properlygrounded.Try the unit in a different AC outlet, if the LED continues tonot light, replace the unit or have a certified electriciancheck your electrical wiring.AC Outlets: Provides two (DX-TVSRGE) or three(DX-S114251) surge protected 110/120V AC; 50/60 Hzoutlets.Swivel plug: Convenient swivel plug folds in for portabilitywhile traveling.Quick Setup Guide / Guide d’installation rapide / Guía de instalación rápidaUsing the surge protector1 Fold out the swivel plug (4) and plug it into a standard3-prong grounded AC outlet.2 Plug AC-powered devices into the AC outlets (3) for surgeprotected powering/charging of the connected devices.3 Plug USB-powered devices into the USB ports (2) for surgeprotected powering/charging of the connected devices.Caution: Risk of electric shock. Use only in dry locations and only indoors.• Do not plug into another relocatable power tap.• Do not plug into another power strip or surge protector(”daisy chain”).• Do not use with any aquarium equipment.• Do not use if properly grounded outlets are not available.• Do not install this device if there is not at least 30 feet (10meters) or more of wiring between the electrical outlet andelectrical service panel.FCC Part 15This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1 This device may not cause harmful interference, and2 This device must accept any interference received, including interference thatmay cause undesired operation.Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment. This Class Bdigital apparatus complies with Canadian ICES-003.Note: These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separationbetween the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/TV technician for help.This device is manufactured using environmentally-safe procedures in compliancewith the Restriction on Hazardous Substances (RoHS) directive.One-year limited warrantyVisit www.dynexproducts.com for details.© 2010 BBY Solutions, Inc. All Rights Reserved.DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All otherproducts and brand names are trademarks of their respective owners.Contenu de l’emballage• Parasurtenseur de voyage• Guide d’installation rapideCaractéristiquesChargeur USB/parasurtenseur : Le ou les ports USBpeuvent être utilisés pour alimenter ou charger despériphériques compatibles avec l’alimentation/charge USB;il intègre également une protection des périphériquescontre les surtensions.Témoin à DEL (modèle DX-S114251 uniquement) :Une DEL verte allumée, signifie que le parasurtenseurfonctionne correctement. Si la DEL ne s’allume pas, celaDX-S114251Front / Face avant / Vista frontal DX-TVSRGEFront / Face avant / Vista frontalSidePanneau latéralVista lateralsignifie que l’appareil a atteint sa capacité maximaled’absorption de surcharge et doit être remplacée ou que laprise secteur sur laquelle il est branché n’est pascorrectement mise à la terre.Essayer l’appareil dans une prise secteur c.a. différente, si laDEL ne s’allume toujours pas remplacer l’appareil oudemander à un électricien qualifié de vérifier le câblageélectrique.Prises c.a. : fournissent deux (DX-TVSRGE) ou trois(DX-S114251) prises protégées contre les surtensions de110/120 V c.a., 50/60 Hz.Fiche pivotante : la prise pivotante commode, se repliepour faciliter la portabilité pendant les déplacements.Utilisation du parasurtenseur1 Déplier la prise pivotante (4) et la brancher sur une prisesecteur standard c.a., mise à la masse à trois plots.2 Brancher les périphériques à alimentation c.a. sur les prisesc.a. (3) pour les protéger contre les surtensions ou lescharger.3 Brancher les périphériques à alimentation USB sur les portsUSB (2) pour les protéger contre les surtensions ou lescharger.Attention : risque de choc électrique. N’utiliser qu’à l’intérieur et dans unenvironnement sec.DX-S11425-TVSRGE_10-0643_QSG_V1.eps 1 7/8/2010 3:42:05 PMDX-S11425-TVSRGE_10-0643_QSG_V1.eps 1 7/8/2010 3:42:05 PM |
Related manuals for Dynex DX-S114251
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine