4ControlsHeating mode Cool air modeEach time the heating mode is selected, it conducts ashort calibration cycle. Airflow will be automaticallycontrolled during this cycle. Once the calibrationcycle is complete, it will revert to the selected airflowspeed.On first use, the heater will default to a temperature1°C higher than the current room temperature.Thereafter, the heater will remember the last targettemperature set.Select the desired room temperature. Pressing redincreases the target temperature, blue decreasesit. The heater will not operate unless the targettemperature is above the room temperature.Press the blue thermostat control button to change the targettemperature to 0°C. The power button light will change fromred to blue. To adjust the airflow speed use the airflowspeed control.Press the red thermostat control button until the digital displayshows the desired target temperature. The power button lightwill change from blue to red.For best results turn on the oscillation control.Select a high flow of air.Select a low flow of air.To return to heating modeWhole roomSpot heat1. Power on 2. Thermostat control