Dyson Slim Instructions Manual

Also see for Slim: Operating manual User manual User manual

Contents

Dyson Slim Instructions Manual Manual pdf 3 page image

Polarization instructionsTo reduce the risk of electric shock, this appliance has a polarized plug (one blade is widerthan the other). This plug will fit in a polarized outlet only one way. If the plug does not fitfully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician toinstall the proper outlet. Do not change the plug in any way.AssemblyEnsure the wand cap cover is closed.Ensure hose is straight when inserting wand.Usage and carryingCautionThis machine is intended for domestic use only. Fine dust, such as plaster dust or flour,should only be vacuumed in very small amounts.Use the carry handle to lift the machine.Do not press the cyclone release button while carrying the machine or it could fall andcause injury.Ensure the cyclone is secured to the machine.Do not shake the machine while carrying or it could fall and cause injury.Keep hair and loose fabrics away from wand cap when machine is on.When finished cleaning, push machine into an upright position to drop stabilizers.Ensure wheels are fully locked in place before releasing the cleaner.Brushbar controlThe brushbar will re-set to “ON” each time you start the machine and put it in thecleaning position.To turn the brushbar off, put the machine in the cleaning position and press the brushbaron/off button.Use machine in bare floors mode for bare or delicate flooring, rugs, and carpets.Ensure the machine is in an upright position before adjusting the setting.The brushbar will automatically stop if it becomes obstructed.If the brushbar stops during use, please refer to the blockages section.Consult your flooring manufacturer’s recommended instructions before vacuuming andcaring for your flooring, rugs, and carpets. Some carpets will fuzz if a rotating brushbar isused when vacuuming. If this happens, we recommend vacuuming in bare floors modeand consulting with your flooring manufacturer.TIP: The brushbar will not turn until you tilt the handle backwards to begin vacuuming.Wand release/Using toolsEnsure machine is in upright position before using tools.To protect your floors, the brushbar will not rotate when the machine is in an uprightposition.Ensure hair and loose clothing are kept clear of wand cap when machine is switched on.Ensure wand cap is closed, unless using with tools.Powerful suction can cause the hose to ‘pull back’ – please take care when cleaning stairs.To avoid personal injury and to prevent the machine from falling when cleaning stairs,always place it at the bottom of the stairs.Do not use your vacuum cleaner outdoors or on wet surfaces.SAVE THESE INSTRUCTIONSTHIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY18689_CAN_DC18_OP_MAN 19/9/07 09:18 Page 3